| Customization: | Available |
|---|---|
| Used for: | Adult |
| Patient Type: | Adult |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Non-invasive Respiratory Support
| Medical Air Compressor (Optional ) | |
| Output pressure | 0.25MPa~0.4MPa |
| Output flow | 60L/min |
| Maximum exhaust pressure | 0.7MPa |
| Start method | start with pressure, and the pressure >0.5MPa |
| Protection function | high-temperature and over-heat protection |
| Noise | ≤55dB(A) |
| Pressure display | pressure gauge |
| Hours meter | 0~9999H |
| Power | a.c.220V/110V, 50Hz |
| Power rate | 300VA |
| Humidifier | |
| Supply Voltage/Frequency | 220V/ 110V 50/60Hz |
| 220V/ 110V 50/60Hz | 150W |
| Heater Wire(Max.) | 22V-,2.73A,60W,50/60Hz |
| Heater Plate Over-temperature Cut Off |
95+5ºC |
| Temperature monitoring | 0-75ºC |
| Temperature (Heated wire mode) |
P1:25-29ºC P2:29-35ºC P3:35-39ºC |
| Temperature (Non-heated wire mode) |
P1:23-27ºC P2:27-32ºC P3:32-37C |
| Humidity Performance | >12mg/L@5-60Lpm |
| Display | Three digit,0.56 inch,7 segment LED 10-70ºC,Accuracy:+2C (In 25-45ºC temperature range) |
| Air Oxygen Blender | |
| Model | AD3000-SPA(6-60LPM) |
| Fi02 | 21%-100%(single Fi02 dial) |
| Flow | 6-60LPM |
| Pressure of source | Air/[email protected] Mpa |
){kind=link}